Canyon 4WD L4-2.9L (2008)
8. Remove the engine mount. You will need to articulate the mount in order to remove the mount.
Installation Procedure
1. Install the engine mount. You will need to articulate the mount in order to install the mount.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice).
2. Install the engine mount bolts.
3. To aid in the installation of the bolts, start a bolt in position (1) first.
Tighten the bolts to 50 N.m (37 lb ft).
4. Lower the engine.