Canyon 4WD L4-2.9L (2008)
9. Remove the fuel fill hose screws.
10. Remove the fuel fill hose from the vehicle.
11. Cap the open end of the fuel tank in order to prevent system contamination.
Installation Procedure
1. Uncap the fuel tank.
2. Position the fuel fill hose to the fender.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the fuel fill hose screws.
Tighten the screws to 2 N.m (18 lb in).