Canyon 4WD L5-3.7L (2007)
Rear Door Hinge: Service and Repair
Rear Side Door Hinge Replacement - Body Side
Rear Side Door Hinge Replacement - Body Side
Removal Procedure
1. Open the door.
2. Remove the bolt retaining the rear door check link to the body.
3. Remove the rear door wiring harness grommet from the body, and disconnect the door wiring harness connectors.
4. Remove the bolts (1) retaining the rear door hinge keeper straps.
5. With an assistant, lift the rear door up off the body side hinges, and place on a clean protected surface.