Canyon 4WD L5-3.7L (2007)
Notice: Refer to Fastener Notice.
1. Install the 3 bolts (1) retaining the roof rail air bag module to the roof.
Tighten the roof rail air bag module bolts to 9 N.m (79 lb in).
2. Install a new forward curtain clip (2).
3. Install the bolt (5) retaining the rear curtain to the roof.
Tighten the roof rail air bag curtain bolts to 9 N.m (79 lb in).
4. Install the rear tether bolt (3).
Tighten the roof rail air bag rear tether bolt to 9 N.m (79 lb in).
5. Install the clips (3) to the pillar.
6. Install the roof rail air bag forward tether bolt (3).
Tighten the roof rail air bag forward tether bolt to 9 N.m (79 lb in).
7. Connect the roof rail air bag electrical connector (1).
8. Install the headliner.
9. Enable the SIR system. Refer to SIR Disabling and Enabling.
10. Install the head restraints from the front seats.