Canyon 4WD L5-3.7L (2007)
Input Shaft: Service and Repair
Transmission Input Shaft Bearing Retainer Replacement
Removal Procedure
1. Drain the transmission fluid. Refer to Transmission Fluid Replacement.
2. Remove the clutch actuator cylinder.
3. Remove the input shaft bearing retainer bolts.
Discard the bolts.
4. Remove the input shaft bearing retainer.
5. Clean and inspect the input shaft bearing retainer. Refer to Transmission Case Cleaning and Inspection.
Installation Procedure
1. Apply a 3 mm (1/8 in) bead of sealant GM P/N 89020326 (Canadian P/N 89021188) to the input shaft bearing retainer.