Canyon 4WD V8-5.3L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the multifunction turn signal switch bolts.
Tighten the bolts to 7 Nm (62 lb in).
3. Route the wire harness assembly down the steering column.
4. Connect any electrical connectors and install the wiring harness through any retainers as needed.
5. Remove the centering tab from the multifunction turn signal switch.
6. Install the steering column trim covers. Refer to Steering Column Trim Cover Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Trim Cover Replacement).
7. Install the steering wheel. Refer to Steering Wheel Replacement (See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Wheel Replacement).
