Envoy 2WD L6-4.2L (2008)
5. Install the nuts which retain the seat pan to the seat assembly.
Tighten the nuts to 25 N.m (18 lb ft).
6. Install the 3 seat switch bezel screws.
7. Calibrate the seat. Refer to Memory Seat Calibration.
5. Install the nuts which retain the seat pan to the seat assembly.
Tighten the nuts to 25 N.m (18 lb ft).
6. Install the 3 seat switch bezel screws.
7. Calibrate the seat. Refer to Memory Seat Calibration.