Envoy 2WD L6-4.2L (2008)
Trunk / Liftgate Lock Cylinder: Service and Repair
Liftgate Lock Cylinder Replacement
Removal Procedure
1. Remove the rear wiper motor.
2. Remove the lock rod from the lock cylinder.
3. Remove the C clip from the groove in the lock cylinder.
4. Remove the lock cylinder from the liftgate.
Installation Procedure
1. Install the lock cylinder to the liftgate.
2. Install the C clip to the groove in the lock cylinder.
3. Install the lock rod to the lock cylinder.
4. Install the rear wiper motor.