Envoy 2WD L6-4.2L (2008)
16. Install the 3 seat switch bezel screws.
Rear Seat Cushion Bracket Replacement
Rear Seat Cushion Bracket Replacement
Removal Procedure
1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the 2 bolts securing the bracket assembly to the seat cushion.
3. Remove the bracket assembly from the seat cushion.
Installation Procedure
1. Position the bracket assembly on the seat cushion.
Notice: Refer to Fastener Notice.
2. Install the 2 bolts securing the bracket assembly to the seat cushion.
Tighten the rear seat cushion bracket bolts to 25 N.m (18 lb ft).
3. Install the rear seat cushion assembly in the vehicle.
Rear Seat Cushion Cover and Pad Replacement
