Envoy 2WD L6-4.2L (2008)
Notice: Refer to Fastener Notice.
1. Install the 3 bolts securing the rear seat cushion latch to the seat pan.
Tighten the rear seat cushion latch release bolts to 10 N.m (88 lb in).
2. Install the small loop (1) onto the rear seat cushion latch (2).
3. Install the strap through the opening in the seat pan.
4. Install the rear seat cushion cover and the pad.
5. Install the rear seat cushion assembly to the vehicle.
Rear Seat Number 1 Cushion Pull Strap Replacement
Rear Seat Number 1 Cushion Pull Strap Replacement
Removal Procedure
1. Remove the rear seat cushion assembly from the vehicle.
2. Remove the rear-seat cushion cover and the pad.
3. Remove the strap (1) from the rear seat cushion latch (2).
Installation Procedure
1. Install the small loop (1) onto the rear seat cushion latch (2).