Envoy 2WD L6-4.2L (2008)
7. Remove the rear brake caliper mounting bracket.
8. Remove the brake rotor retaining clips, if equipped.
9. If the brake rotor is stuck, perform the following:
1. Assemble J-46277 to J 2619-01 .
2. Insert J-46277 between the rotor friction surfaces in the vent section of the rotor. DO NOT place the J-46277 on the rotor friction surface.
3. Using the J-46277 and J 2619-01 , release the rotor from the hub assembly.
