Envoy 2WD L6-4.2L (2008)
Front Crankshaft Seal: Service and Repair
Crankshaft Front Oil Seal Replacement
Tools Required
J 44218 Seal Installer
Removal Procedure
Important: Do not damage the engine front cover or the crankshaft.
1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement (See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft
Pulley/Service and Repair) .
2. Pry out the crankshaft front oil seal using a suitable tool. Use the provided slots for prying out the seal.
Installation Procedure
1. Apply the engine oil to the outside diameter of the crankshaft front oil seal.