Envoy 2WD L6-4.2L (2008)
3. Install the NEW power steering gear oil seal (1) to the power steering gear using the seal installation end of the J 44586 (2).
4. Ensure the power steering gear oil seals (1) are fully seated in the power steering gear.
5. Lower the vehicle.
6. Install the power steering hose assembly to the vehicle.
Notice: Refer to Fastener Notice .
7. Install the power steering hose assembly to frame brackets retaining bolts.
Tighten the bolts to 10 N.m (89 lb in).
8. Install the power steering hose assembly bracket to the wheel well.
9. Install the power steering hose assembly bracket retaining bolt at the wheel well.
Tighten the bolt to 10 N.m (89 lb in).