Envoy 2WD L6-4.2L (2008)
![background image](/gmc/envoy_2wd/l6-4.2l/Page-962002.png)
1. Install the heat shield (1) to the underbody, if equipped.
Notice: Refer to Fastener Notice .
2. Install the nuts (2) securing the heat shield to the underbody, if equipped.
Tighten the nuts to 7 N.m (62 lb in).
3. Install the heat shield (5) to the underbody.
4. Install the nuts (4) securing the heat shield to the underbody .
Tighten the nuts to 7 N.m (62 lb in).
5. Lower the vehicle.