Envoy 2WD L6-4.2L (2008)
![background image](/gmc/envoy_2wd/l6-4.2l/Page-666004.png)
1. If the ECM and bracket assembly was removed in order to access other components, proceed to step 5.
2. If the ECM bracket was removed, perform the following steps, otherwise proceed to step 3:
1. Install the ECM bracket (3) to the studs on the intake manifold.
Notice: Refer to Fastener Notice.
2. Install the ECM bracket bolts (2) and nuts (1).
Tighten the bolts/nuts to 9 N.m (80 lb in).
3. Install the ECM (1) to the bracket.