Envoy 2WD L6-4.2L (2008)
8. Install the battery positive cable into the conduit.
9. Connect the battery cable conduit to the conduit retaining clip.
10. Install the positive battery cable terminal (2) to the junction block.
11. Tighten the positive battery cable terminal bolt (1) at the junction block.
Tighten the bolt to 10 N.m (89 lb in).
12. Install the positive battery cable (1) to the battery.
13. Tighten the battery positive cable bolt.
Tighten the bolt to 15 N.m (11 lb ft).
14. Connect the battery negative cable.