Envoy 2WD L6-4.2L (2008)
10. Connect the transmission harness 20-way connector to the transmission pass-through connector.
Align the arrows on each half of the connector and insert straight down.
11. Install the transmission oil pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement (See: Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement) .
12. Lower the vehicle.
13. Fill the transmission to the proper level with DEXRON(R) VI transmission fluid. Refer to Transmission Fluid Check (See: Automatic
Transmission/Transaxle/Testing and Inspection/Component Tests and General Diagnostics/Transmission Fluid Check) .
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, the engine control module (ECM),
powertrain control module (PCM) or transmission control module (TCM) will need to relearn TAP values. Transmission performance
may be affected as new TAP values are learned.
14. Reset the TAP values. Refer to Transmission Adaptive Functions (TCM) (See: Automatic Transmission/Transaxle/Description and
Operation/Transmission Adaptive Functions (TCM)) .