Envoy 2WD L6-4.2L (2008)
5. Install the console. Refer to Console Replacement .
6. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
7. Install the cable to the retainer (3) on the floor panel. If the vehicle is equipped with 4WD, install the cable to the retainers located on the transfer
case.
8. Install the range selector cable (4) to the bracket (1).
9. Install the retainer (5) to the range selector cable.
10. Install the end of the range selector cable to the transmission range selector lever ball stud (6).
11. Adjust the range selector cable. Refer to Range Selector Lever Cable Adjustment (See: Adjustments) .
12. Lower the vehicle and check for proper operation.
