Envoy 2WD L6-4.2L (2008)
12. Remove the TCC solenoid (with O-ring seal) and wiring harness assembly from the transmission case.
13. Inspect the TCC solenoid and wiring harness assembly for the following defects:
*
Damage
*
Cracked connectors
*
Exposed wires
*
Loose pins
Installation Procedure
1. Install the wiring harness and TCC solenoid assembly with a new O-ring seal to the transmission.
2. Install the pass-through electrical connector to the transmission case.
Notice: Refer to Fastener Notice .