gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Tightening Torque|Page 2485
Page 1
background image

Vehicle Lifting: Service and Repair

LIFTING AND JACKING THE VEHICLE

Caution: To avoid any vehicle damage, serious personal injury, or death, when components are removed from the vehicle and the vehicle is
supported by a hoist, perform the following steps:

^

Chain the vehicle to the hoist at the same end as the components that are being removed.

^

Support the vehicle at the opposite end from which the components are being removed.

Caution: To avoid any vehicle damage, serious personal injury or death, always use the jackstands to support the vehicle when lifting the
vehicle with a jack.

Notice: Perform the following steps before beginning any vehicle lifting or jacking procedure:

1. Remove or secure all of the vehicles contents in order to avoid any shifting or any movement that may occur during the vehicle lifting or jacking

procedure.

2. The lifting equipment or the jacking equipment weight rating must meet or exceed the weight of the vehicle and any vehicle contents.
3. The lifting equipment or the jacking equipment must meet the operational standards of the lifting equipment or jacking equipment's manufacturer.
4. Perform the vehicle lifting or jacking procedure on a clean, hard, dry, level surface.
5. Perform the vehicle lifting or jacking procedure only at the identified lift points. DO NOT allow the lifting equipment or jacking equipment to

contact any other vehicle components.

Failure to perform the previous steps could result in damage to the lifting equipment or the jacking equipment, the vehicle, and/or the vehicle's contents.

Engine, Cooling and Exhaust > < Tightening Torque|Page 2485