Envoy 2WD V8-5.3L VIN M (2005)
Amplifier: Service and Repair
Amplifier Replacement (Envoy XUV)
AMPLIFIER REPLACEMENT (ENVOY XUV)
REMOVAL PROCEDURE
1. Remove the left body side trim panel.
2. Remove the screws retaining the amplifier cover to the body.
3. Remove the amplifier cover.
4. Remove the screws retaining the amplifier to the body.
5. Partially remove the amplifier to disconnect the electrical connectors.
6. Remove the amplifier from the vehicle.
INSTALLATION PROCEDURE
1. Partially install the amplifier to connect the electrical connectors.
2. Install the amplifier to the body.
3. Install the screws retaining the amplifier to the body.
Tighten the fasteners to 10 N.m (88 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the screws retaining the amplifier cover to the body.
Tighten the fasteners to 2.5 N.m (22 lb in).