Envoy 2WD V8-5.3L VIN M (2005)
1. Install the auxiliary power outlet to the trim panel, if equipped.
2. Install the cargo lamp.
3. Install the endgate window emergency switch, if equipped.
4. Install the body side trim panel in the vehicle.
5. Install the cargo tie down loops and the cargo tie down blanks.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the cargo tie down loop bolt to 35 N.m (26 lb ft).
6. Install the rear floor front trim plate.
7. Install the body lock pillar upper tie bar trim cover.
8. Install the cargo mat.
Trim Panel Replacement - Rear Quarter - Left
TRIM PANEL REPLACEMENT - REAR QUARTER - LEFT
REMOVAL PROCEDURE
