Envoy 2WD V8-5.3L VIN M (2005)
9. Install the moveable roof motor/actuator.
10. Install the moveable roof control module.
11. Install the lock pillar upper tie bar trim panel.
12. Install the endgate weatherstrip to the end of the moveable roof frame.
13. Install the moveable roof panel assembly.
14. Install the front and rear roof appliques.
15. Perform a moveable roof panel learn cycle, by pressing and holding the roof switch in the forward position until the roof panel is fully opened,
then pressing and holding the roof switch in the rearward position until the roof panel is fully closed.
16. Inspect for proper operation of the moveable roof panel and endgate window.
Moveable Roof Panel Guide Bracket Replacement
MOVEABLE ROOF PANEL GUIDE BRACKET REPLACEMENT
REMOVAL PROCEDURE
1. Remove the moveable roof panel.
2. Slide the moveable roof panel bracket assembly out of the moveable roof guide assembly.
INSTALLATION PROCEDURE
1. Install the moveable roof panel bracket to the moveable roof guide assembly, ensuring the pins are in the correct locations.
2. Install the moveable roof panel.
Moveable Roof Panel Guide Replacement
