Envoy 2WD V8-5.3L VIN M (2005)
1. Open the moveable roof panel.
2. Remove the rear header seal by pulling the seal out of the retaining channel of the moveable roof panel.
INSTALLATION PROCEDURE
1. Install the rear header seal to the channel of the moveable roof panel.
2. Press the rear header seal into place, ensuring the seal is fully seated, and centered in the moveable roof panel.
3. Close the moveable roof panel.
Moveable Roof Panel Spring Wedge Replacement - Front
MOVEABLE ROOF PANEL SPRING WEDGE REPLACEMENT - FRONT
REMOVAL PROCEDURE