Envoy 2WD V8-5.3L VIN M (2005)
2. Remove the 4 screws (2) that retain the sunroof window (1) to the sunroof module assembly.
3. Remove the sunroof window from the top of the vehicle.
INSTALLATION PROCEDURE
1. Position the sunroof window (1) to the vehicle.
2. Loosely insert the screws (2) that retain the sunroof window (1) to the sunroof module assembly.
3. Adjust the sunroof window height so that the window is flush with the roof panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 3 N.m (27 lb in).
Sunroof Window Weatherstrip Replacement
SUNROOF WINDOW WEATHERSTRIP REPLACEMENT
REMOVAL PROCEDURE
1. Remove the sunroof window.
2. Carefully remove the sunroof window weatherstrip from the perimeter of the sunroof window.
INSTALLATION PROCEDURE