Envoy 2WD V8-5.3L VIN M (2005)
Head Rest: Service and Repair
Head Restraint Replacement - Front Seat
Head Restraint Replacement - Front Seat
Removal Procedure
1. Raise the head restraint to the full up position by pressing the release tab (2), and by lifting up the head restraint.
2. Insert a small tool into the head restraint retainer port (1).
3. In order to release the head restraint retainer, simultaneously lift up on the head restraint while applying inward pressure to the tool in the retainer
release port (1).
4. Remove the head restraint from the seat assembly.
Installation Procedure
1. Position the head restraint to the seat assembly.
2. Verify that the notches in the head restraint posts are indexed toward the rear of the seat assembly.
3. Push the head restraint downward into the fully installed position.
4. Raise the head restraint to the full up position. Verify that the head restraint retainer prevents the head restraint from being removed from the seat
assembly.
Head Restraint Guide Replacement - Front Seat
Head Restraint Guide Replacement - Front Seat
Removal Procedure
1. Remove the front seat assembly.
2. Remove the front seat head restraint.
3. Pull the seat back cover and the seat back pad up high enough to expose the head restraint guides.
4. Squeeze the retaining tabs located at the bottom of the guides together in order to remove the guides from the seat frame.
5. Remove the guides from the seat back frame.