Envoy 2WD V8-5.3L VIN M (2005)
7. Remove the oil filter from the oil pan.
8. Inspect the old oil filter to ensure that the filter seal is not left on the oil pan.
Installation Procedure
1. Wipe the excess oil from the oil filter mounting.
2. Lubricate the oil filter seal with clean engine oil.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the oil filter to the oil pan.
Tighten the filter to 30 Nm (22 ft. lbs.).
4. Wipe the excess oil from the drain plug hole.