Envoy 2WD V8-5.3L VIN M (2005)
19. Connect the A/C compressor pressure switch electrical connector (2).
20. Install the harness clip (1) to the cylinder head.
21. Connect the MAF/IAT sensor electrical connector (1).
22. Install the air cleaner outlet duct.
23. Install the fuel fill cap.
24. Connect the negative battery cable.
25. Use the following procedure in order to inspect for leaks:
0. Turn the ignition ON, with the engine OFF, for 2 seconds.
1. Turn the ignition OFF for 10 seconds.
2. Turn the ignition ON, with the engine OFF.
3. Inspect for fuel leaks.