Envoy 2WD V8-5.3L VIN M (2005)
3. Connect the right side air temperature actuator electrical connector.
4. Install the I/P carrier.
5. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to Re-Calibrating Actuators (Primary).
Defroster Actuator
DEFROSTER ACTUATOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the I/P carrier.
2. Disconnect the electrical connector from the defroster actuator.
3. Remove the screws from the defroster actuator.
4. Remove the defroster actuator.
INSTALLATION PROCEDURE
1. Install the defroster actuator.
2. Install the defroster actuator screws.
Tighten the screws to 1.9 N.m (17 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the electrical connector to the defroster actuator.
4. Install the I/P carrier.
Mode Actuator
MODE ACTUATOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the I/P carrier.