Envoy 2WD V8-5.3L VIN M (2005)
6. Remove the connector position assurance (CPA) (1) from the steering wheel module yellow 4-way connector (2) located left of the steering
column near the knee bolster.
7. Disconnect the steering wheel module yellow 4-way connector (2) located left of the steering column near the knee bolster.
ENABLING PROCEDURE
1. Remove the key from the ignition.
2. Connect the steering wheel module yellow 4-way connector (2) located left of the steering column near the knee bolster.
3. Install the CPA (1) to the steering wheel module yellow 4-way connector (2) located left of the steering column near the knee bolster.