Envoy 2WD V8-5.3L VIN M (2005)
Center Mounted Brake Lamp: Service and Repair
High Mounted Stop Lamp Replacement (Envoy XUV)
HIGH MOUNTED STOP LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Remove the end gate window reveal molding.
2. Remove the 3 nuts retaining the high mounted stop lamp to the reveal molding.
INSTALLATION PROCEDURE
1. Install the high mounted stop lamp to the end gate reveal molding.
2. Install the 3 nuts that retain the high mounted stop lamp to the reveal molding.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts to 2.5 N.m (22 lb in).
3. Install the end gate window reveal molding.