Envoy 2WD V8-5.3L VIN M (2005)
Power Steering Line/Hose: Service and Repair
Power Steering Hose Assembly Replacement (5.3L)
Tools Required
^
J44586 Power Steering Gear Oil Seal Remover/Installer
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Notice: Refer to Power Steering Hose Disconnected Notice in Service Precautions.
Install the drain pan under the vehicle.
3. Remove power steering hose assembly to power steering gear mounting bolt (2).
4. Disconnect the power steering hose assembly (1) from the power steering gear (3).
5. Disconnect the power steering return hose and power steering cooler hose from the power steering cooler.
6. Lower the vehicle.