Envoy 2WD V8-5.3L VIN M (2005)
9. Install the generator cable lead (3).
10. Install the generator cable nut (2).
Tighten the nut to 9 N.m (80 lb in).
11. Position the generator cable boot (1).
12. Close the clips on the retaining brackets.
13. Tighten the positive terminal bolt (1) that secures the harness to the junction block.
Tighten the bolt to 10 N.m (89 lb in).
14. Connect the positive battery cable (4).
Tighten the positive cable to 15 N.m (11 lb ft).
15. Connect the negative battery cable (5).