Envoy 2WD V8-5.3L VIN M (2005)
8. Raise and support the vehicle. Refer to Vehicle Lifting.
9. Important: Note the relationship of the intermediate shaft to the power steering gear and the intermediate shaft to the steering column in order to
ensure proper installation.
Remove the lower intermediate shaft to the power steering gear input shaft pinch bolt.
10. Disconnect the lower intermediate shaft from the power steering gear.
11. Remove the lower intermediate shaft from the vehicle.
Installation Procedure
1. Install the lower intermediate shaft to the vehicle.
2. Connect the lower intermediate shaft to the power steering gear.
3. Notice: Refer to Fastener in Service Precautions.
Install the lower intermediate shaft to the power steering gear input shaft pinch bolt.
Tighten the lower intermediate shaft to the power steering gear input shaft pinch bolt to 40 Nm (29 ft. lbs.).
4. Lower the vehicle.
5. Install the lower intermediate shaft boot and connect the lower intermediate shaft boot to the power steering gear.