Envoy 2WD V8-5.3L VIN M (2005)
Front Steering Knuckle: Service and Repair
Steering Knuckle Replacement (RWD)
Tools Required
^
J24319-B Steering Linkage and Tie Rod Puller
^
J43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the wheel hub and bearing.
4. Remove the outer tie rod retaining nut.
5. Disconnect the outer tie rod from the steering knuckle using J24319-B.
6. Remove the brake hose bracket retaining bolts.
7. Remove the brake hose bracket from the steering knuckle.