Envoy 2WD V8-5.3L VIN M (2005)
Tighten the TCC solenoid retaining bolts to 11 Nm (97 inch lbs.).
14. Install the internal wiring harness to the valve body. The internal wiring harness has a tab (1) on the edge of the conduit.
15. Place the tab between the valve body and the pressure switch in the location shown (2). Press the harness into position on the valve body bolt
bosses (1, 3).
16. Install the TCC PWM solenoid (1) to the control valve body.
17. Install the TCC PWM solenoid retainer (2).
18. Install the transmission fluid indicator stop bracket (1) and bolt (2).
Tighten the transmission fluid indicator stop bracket bolt to 11 Nm (97 inch lbs.).