Envoy 2WD V8-5.3L VIN M (2005)
5. Install the rear compartment anchors.
6. Install the rear seat backs.
7. Install the right front sill plate.
8. Connect the washer hose connection at the liftgate.
9. Connect the pass-through grommet the liftgate.
10. Install the left rear quarter upper trim panel.
11. Install the rear washer hose out through the bulkhead, and seat the grommet (1).
12. Connect the rear washer hose connection (2) near the coolant tank.
Washer Hose Replacement - Rear (XUV)
WASHER HOSE REPLACEMENT - REAR (XUV)
REMOVAL PROCEDURE
1. Disconnect the rear washer hose connection (2) near the coolant tank.
2. Remove the washer hose grommet (1) from the hole in the bulkhead, and feed the washer hose into the vehicle.
3. Remove the right front sill plate.
4. Remove the rear seat backs.
5. Remove the rear compartment anchors.
6. Roll the carpet forward to expose the wiring harness/hose assembly.
7. Remove the left rear quarter upper trim panel.
8. Open the lift gate to access the pass-through grommet.
