Envoy 2WD V8-5.3L VIN P (2004)
1. Remove the jack bracket to the floor studs with the retaining nuts (1).
Tighten the jack bracket nuts to 10 N.m (88 lb in).
2. Remove the tool package (4) to the jack bracket with nut (3). Do not overtighten the nut.
3. Install the jack stowage cover.
Trim Cover Replacement - Body Lock Pillar Upper Tie Bar - Cargo (Envoy XUV)
Trim Cover Replacement - Body Lock Pillar Upper Tie Bar - Cargo (Envoy XUV)
Removal Procedure
1. Pull the trim cover down to disengage clips.
2. Remove the trim cover from the vehicle
Installation Procedure
1. Install the trim cover to the upper lock pillar.
2. Push the trim cover to engage the clips in the upper lock pillar
Trim Cover Replacement - Body Lock Pillar Upper Tie Bar - Passenger (Envoy XUV)
Trim Cover Replacement - Body Lock Pillar Upper Tie Bar - Passenger (Envoy XUV)
Removal Procedure