Envoy 2WD V8-5.3L VIN P (2004)
![background image](/gmc/envoy_2wd/v8-5.3l_vin_p/Page-2304015.png)
5. Install the cargo tie down loops and the cargo tie down blanks.
Tighten the cargo tie down loop bolt to 35 N.m (26 lb ft).
6. Install the rear floor front trim plate.
7. Install the body lock pillar upper tie bar trim cover.
8. Install the cargo mat.
Trim Panel Replacement - Rear Quarter - Left (Long Wheelbase)
TRIM PANEL REPLACEMENT - REAR QUARTER - LEFT (LONG WHEELBASE)
REMOVAL PROCEDURE
1. Remove the cargo shelf.
2. Tumble the third row seats to the cargo position.
3. Remove the left body side window rear garnish molding.
4. Remove the left body side window forward garnish molding.
5. Remove the lift gate sill plate.
6. Remove the left rear door sill panel.
7. Remove the lower seat belt anchor bolt.
8. Remove the auxiliary power outlet from the trim panel.
9. Release the five screws that retain the rear quarter trim panel to the body.
10. Remove the rear quarter trim panel from the vehicle.
INSTALLATION PROCEDURE