Envoy 2WD V8-5.3L VIN P (2004)
10. Disconnect the instrument panel harness connector (1) from the junction block.
11. Disconnect the mobile telephone harness connector (1) from the junction block.
12. Disconnect the body wiring harness connector (1) from the junction block.
13. Disconnect the headliner harness connector (2) from the junction block.
14. Disconnect the console harness connector from the junction block.
15. Remove the block base retaining nuts from the floor studs.
16. Remove the block base from the floor panel.
INSTALLATION PROCEDURE
1. Install the block base to the floor studs.
2. Install the block base retaining nuts to the floor studs.