Envoy 2WD V8-5.3L VIN P (2004)
Ball Joint: Service and Repair
Upper Ball Joint
Upper Ball Joint Replacement
Tools Required
^
J9519-E Lower Ball Joint Remover and Installer
^
J21474-01 Control Arm Bushing Set
^
J45117Ball Joint Installation Spacer
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the steering knuckle with wheel hub attached.
4. Remove the upper ball joint retaining clip.
5. Remove the upper ball joint boot.
6. Remove the upper ball joint from the steering knuckle using J9519-E.
Installation Procedure