Envoy 4WD L6-4.2L VIN S (2003)
Dome Lamp Bulb: Service and Repair
DOME AND READING LAMP BULB REPLACEMENT
REMOVAL PROCEDURE
1. Carefully grasp the sides of the lens to partially expose the rear retaining tab.
2. Use a flat bladed tool in order to release the rear lens retaining tab.
3. Lower the rear edge of the lens away from the headliner.
4. Move the lens rearward in order to release the front horizontal retaining tab.
5. Remove the lens from the headliner.
6. If replacing the reading lamp bulb (1), remove the reflector (2) from the dome lamp.
7. Remove the reading lamp bulb from the socket.
