Envoy 4WD L6-4.2L VIN S (2003)
Accessory Delay Module: Scan Tool Testing and Procedures
Scan Tool Data Definitions
SCAN TOOL DATA DEFINITIONS
DATA
Battery Voltage: The scan tool displays the battery system voltage.
INPUT
Left Rear Door Jamb Switch: The scan tool displays the position of the left rear door. The scan tool displays On when the door is open.
Right Rear Door Jamb Switch: The scan tool displays the position of the right rear door. The scan tool displays On when the door is open.
Ignition 0: The scan tool displays the position of the ignition switch. The scan tool displays On when the ignition switch is in the Accessory, RUN or
CRANK position.
Ignition 1: The scan tool displays the position of the ignition switch. The scan tool displays On when the ignition switch is in the Run or Crank
position.
Ignition 3: The scan tool displays the position of the ignition switch. The scan tool displays On when the ignition switch is in the RUN position only.
Ignition Accessory: The scan tool displays the position of the ignition switch. The scan tool displays On when the ignition switch is in the Accessory
or RUN position only.
Scan Tool Data List
Scan Tool Output Controls
