Envoy 4WD V6-4.3L VIN W (1998)
Wiper Switch: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Remove the wiper/washer switch from the trim plate.
3. Disconnect the electrical connector from the wiper/washer switch.
INSTALLATION PROCEDURE
1. Connect the electrical connector from the wiper/washer switch.
2. Install the wiper/washer switch to the trim plate.
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
3. Connect the negative battery cable.