Envoy 4WD V8-5.3L (2007)
4. Install the side impact module tub to the seat back frame with 2 push pins (1).
Notice: Refer to Fastener Notice.
5. Install the inflatable side impact module to the seat back frame with 2 screws (1).
Tighten the side impact module screws to 9 N.m (80 lb in).
6. Install the seat belt and retractor assembly.
7. Install the lumbar assembly.
8. Install the front seat back panel.
9. Install the seat back cover and pad.
10. Install the front seat back.
11. Install the seat trim panel.
12. Install the seat assembly to the vehicle.
Driver Seat Recliner Handle and Passenger Seat Recliner Handle Replacement
Driver Seat Recliner Handle and Passenger Seat Recliner Handle Replacement
Removal Procedure
1. Open the door.
2. Remove the screw securing the recliner handle.
3. Remove the recliner handle.
Installation Procedure
1. Position the recliner handle onto the seat assembly.