Envoy 4WD V8-5.3L (2007)
Notice: Refer to Fastener Notice.
3. Install the park brake cable retaining nuts to the underbody mounting studs.
Tighten the park brake cable retaining nuts to 10 N.m (7 lb ft).
4. Raise the fuel tank the fuel tank.
5. Install the rear support bracket for the fuel tank.
6. Remove the pole jack and the block of wood from the fuel tank.
7. Install the park brake cable on the actuator.
8. Depress the retaining clips for the park brake cable.
9. Install the park brake retainer to the frame (left rear shown).