Envoy 4WD V8-5.3L (2007)
4. Install the coolant air bleed covers (313) with seals (308), if necessary.
5. Remove the coolant air bleed pipe cover bolts (312), if necessary.
Tighten the bolts to 12 N.m (106 lb in).
6. Install the coolant air bleed hose to the coolant air bleed pipe.
7. Position the coolant air bleed hose clamp at the coolant air bleed pipe.
8. Fill the cooling system, if necessary. Refer to Draining and Filling Cooling System (LL8) Draining and Filling Cooling System (LH6, LS2).
9. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement or Air Cleaner Resonator Outlet Duct
Replacement.