Envoy 4WD V8-5.3L (2007)
Tighten the nuts to 50 N.m (37 lb ft).
11. Install the shock module. Refer to Shock Module Replacement.
12. Install the front differential carrier. Refer to Differential Carrier Assembly Replacement (4.2L In-Line Six Cylinder) Differential Carrier Assembly
Replacement (V8).
13. Install the left side wheel drive shaft. Refer to Wheel Drive Shaft Replacement.
14. Install the engine protection shield. Refer to Engine Protection Shield Replacement.
15. Install the front tire and wheels. Refer to Tire and Wheel Removal and Installation.
16. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.