Envoy 4WD V8-5.3L (2007)
![background image](/gmc/envoy_4wd/v8-5.3l/Page-661007.png)
8. Inspect the sprockets for proper alignment. The mark on the camshaft sprocket (1) should be located in the 6 o'clock position and the mark on the
crankshaft sprocket (2) should be located in the 12 o'clock position.
9. Remove the EN 46330.
Important: Do not apply threadlock to the flex plate bolts at this time.
10. Temporarily install the automatic transmission flex plate or manual transmission flywheel and bolts. Refer to Engine Flywheel Installation.