Envoy 4WD V8-5.3L (2007)
Air Door Actuator / Motor: Service and Repair
HVAC - Manual
Air Temperature Actuator Replacement - Right Side
Air Temperature Actuator Replacement - Right Side
Removal Procedure
1. Remove the I/P carrier.
2. Remove the right side air temperature actuator retaining screws.
3. Disconnect the right side air temperature actuator electrical connector.
4. Remove the right side air temperature actuator.
Installation Procedure
1. Install the right side air temperature actuator.
Notice: Refer to Fastener Notice.
2. Install the right side air temperature actuator retaining screws.
Tighten the screws to 1.9 N.m (17 lb in).
3. Connect the right side air temperature actuator electrical connector.
4. Install the I/P carrier.
5. Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to Actuators Recalibration (Primary).
See: Testing and Inspection/Programming and Relearning
Air Temperature Actuator Replacement - Left Side
Air Temperature Actuator Replacement - Left Side
Removal Procedure
1. Remove the I/P carrier.